custom bronze refrigerator pulls
Sometimes the standard hardware that is available for thermador and subzero refrigerators leaves a lot to be desired. We have come
Hardware Molds
These are some molds we have for our lost wax casting process. These molds must be kept in a climate controlled
Yale & Towne Bronze Hinge
This is a cast bronze hinge from the 1890’s. Note the taper on the hinge and the stamped numbers on the
Entry Hardware Late 1890’s
This is a fine entry set from a home on the North Shore. Always be sure that you don’t let your
hardware shot
This is and example of some of the hardware on display in our showroom. It is always interesting to see the
prototype hardware custom flush pulls
The original pull dates to 1890 and was made by Yale & Towne a premier hardware manufacturer back ‘in the day.’
Lock Detail
This is a detail photo of 2 rabbit type locks for the doors that were referred to in the previous post.
Cremone Detail
This is a typical French type installation of a cremone bolt. They often were used to hold the inactive door closed
More Cremone Hardware
These are newly fabricated cremones that were installed in Virginia. The finish is butler silver. Architects and designers seem to have
Cremone Hardware Restoration
These cremone bolts were restored on a local home in a polished brass finish. This type of hardware often was disposed
Tudor Entry Hardware
This entry set was made by Wilmette Hardware. This piece is cast from both solid bronze and solid nickel. Much of
Y&T Custom Hardware
This is a plate and knob that we made using the lost wax method of casting on a local project. All