Hardware Molds

...the only fine architectural hardware blog...

Posted on 30th August, by gbettenhausen in Blogroll. No Comments

These are some molds we have for our lost wax casting process.? These molds must be kept in a climate controlled environment to protect them.

Comments are closed.

We are dedicated to hand-crafted quality and want to show it off. Click on full-blog to see an archive of our abilities.

These cremone parts are being made and will be used to replicated cremone bolts on historic hope’s windows that are currently being restored. We...

These custom brass screws were cast for a building down at the University of Chicago. These are not made anymore and our client...

These levers were just cast in solid brass and are ready to be machined and finished. The levers will have a broach so...

This hardware is hot off the press! These french deco inspired knobs come in cabinet knobs, pulls and the door knobs shown here.

These custom intermediate pivot hinges were made for a historic preservation project in Minnesota. We manufacture any type of custom hinge from...

If you are going to make a custom rim lock you may as well silver plate it when you are done. This was...

These knobs are still hot from the nickel bath! They will be installed on a project by a shop out of St....

This install of our ice box hardware was just completed. The hardware is typically ordered in polished nickel – machined and finished by...

This post is a bit different – and hopefully more educational as well. We recently made hardware that resides in the penthouse of the...